Sensio SE10160R1, RGB Colour Changing, LED Strip Lighting
LED Colour: RGB
Driver: Starter Kit
Sensio SE10160R1 RGB Colour Changing LED Strip Lighting
Self-adhesive 3M tape backing allows for quick and simple installation.
7 pre-set colours of the RGB (cool white, violet, yellow, cyan, green, red and blue).
The perfect product to create mood lighting: either set to one of the 7 colours, or select the slow or rapid colour change option.
Male and female ends on the strip allow you to create the length required.
The strip can be cut to length: scissor marks on the product indicate where it's suitable to cut (every 75-83mm).
Use the RGB remote control to create the effect or choose the colour that is perfect for you at the touch of a dial.
All you need to install is an adequate amount of flexible strips, driver connection lead(s) - one per run of strips, driver, RGB remote control and a receiver.
Run a maximum length of 10m from one driver.
When using the RGB remote control, each new run of RGB strip lighting requires a driver and a receiver; however multiple receivers can be controlled via one remote control.
Starter kit includes a 30W driver, receiver and remote.